How to use the Radio features on a Panasonic Audio System

Presetting stations automatically

1. Complete the Preparation instructions described above.
2. Press [PLAY MENU] to select “A.PRESET”.
3. Press the arrow up ▲ or down ▼ to select “LOWEST” or “CURRENT” and then press [OK].
   • LOWEST: To begin auto preset with the lowest frequency (“FM 87.9” or “FM 87.5”).
   • CURRENT: To begin auto preset with the current frequency.
4. The tuner starts to preset all the stations it can receive into the channels in ascending order.
5. To cancel, press the Stop [■] button.

Listening to a preset channel

1. Complete the Preparation instructions described above.
2. Press [PLAY MENU] repeatedly to select “TUNE MODE”.
3. Press the arrow up ▲ or down ▼ to select “PRESET” and then press [OK].
4. Press the Skip back or Skip forward button to select the channel.

You can select channel 1 to 5 by pressing one of [1] to [5] on the unit.

Manual tuning

1. Complete the Preparation instructions described above.
2. Press [PLAY MENU] repeatedly to select “TUNE MODE”.
3. Press the arrow up ▲ or down ▼ to select “MANUAL” and then press [OK].
4. Press the Skip back or Skip forward button to tune in the station. To tune automatically, press and hold the button until the frequency starts changing quickly.

Presetting stations manually

1. Complete the Preparation instructions described above.
2. While listening to a station press [OK].
3. Press the arrow up ▲ or down ▼ to select the channel and then press [OK].

Do steps 1 through 2 again to preset more stations.

A station previously stored is overwritten when another station is stored in the same channel preset.

Changing the stations stored under [1] to [5]

On the main unit

1. Complete the Preparation instructions described above.
2. While listening to a station press and hold one of the 1 - 5 buttons until "P1, P2, P3, P4 or P5"" appears on the display.
3. Press the arrow up ▲ or down ▼ to select the channel and then press [OK].

When you change the stations stored under [1] to [5], channel 1 to 5 are also changed to the same corresponding stations.

Manual tuning

1. Press [RADIO] to select “FM or AM”.
2. Press the rewind or fast forward button to tune in the station. To tune automatically, press and hold the button until the frequency starts changing quickly.

Improving the Radio sound quality

When "FM" is selected

1. Press [RADIO] to select “FM Mode”.
2. Press the arrow left ◄ or right ► to select “MONO" and then press [OK].
3. To cancel select “Stereo". “MONO" is also cancelled when you change the frequency.

When "AM" is selected

1. Press [RADIO] to select “B.PROOF”.
2. Press the arrow left ◄ or right ► to select “BP 1" or “BP 2" and then press [OK].

Memory presetting

30 FM and 15 AM stations can be preset.

Automatic presetting

1. Press [RADIO] to select “FM or AM”.
2. Press [OK] to select “LOWEST” or “CURRENT” frequency.
3. Press [AUTO PRESET] to start presetting.
4. To cancel, press the Stop [■] button.

Manual presetting

1. Press [RADIO] to select “FM or AM”.
2. Press the rewind or fast forward button to tune in the station.
3. Press [PROGRAM].
4. Press the numeric buttons to select a preset number.
5. Do steps 1 through 4 again to preset more stations. The new station replaces any station that occupies the same preset number.

Selecting a preset station

1. Press [RADIO] to select “FM or AM”.
2. Press the Skip back or Skip forward button to select a preset station.

Manual tuning

Using the Remote control

1. Press [RADIO] to select “FM or AM”.
2. Press the rewind or fast forward button to tune in the station. To tune automatically, press and hold the button until the frequency starts changing quickly.

Using the Main Unit

1. Press [RADIO] to select “FM or AM”.
2. Press [TUNE MODE] to select “MANUAL”.
3. Press the Skip back or Skip forward button to tune in the station.

Memory presetting

You can preset up to 30 FM and 15 AM radio stations

Automatic presetting

1. Press [RADIO] to select “FM or AM”.
2. Press [AUTO PRESET] to select “LOWEST” or “CURRENT”
   • LOWEST: To begin auto preset with the lowest frequency.
   • CURRENT: To begin auto preset with the current frequency.
3. Press [OK] to start presetting. The tuner starts to preset all the stations it can receive into the channels in ascending order.
4. To cancel, press the Stop [■] button.

Manual presetting

1. Press [RADIO] to select “FM or AM”.
2. Press the rewind or fast forward button to tune in the station.
3. Press [OK].
4. Press the numeric buttons to select a preset number.
5. Do steps 1 through 4 again to preset more stations. The new station replaces any station that occupies the same preset number.

Selecting a preset station

Using the remote control

1. Press [RADIO] to select “FM or AM”.
2. Press the Skip back or Skip forward button to select a preset station.

Using the Main Unit

1. Press [RADIO] to select “FM or AM”.
2. Press [TUNE MODE] to select “PRESET”.
3. Press the Skip back or Skip forward button to select a preset station.

Improving the sound quality

When "FM" is selected

1. Press [PLAY MENU] to select “FM Mode”.
2. Press the arrow left ◄ or right ► to select “MONO" and then press [OK].
3. To cancel select “Stereo". “MONO" is also cancelled when you change the frequency.

When "AM" is selected

1. Press [PLAY MENU] to select “B.PROOF”.
2. Press the arrow left ◄ or right ► to select the setting that provides the best reception and then press [OK].

Manual tuning

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] repeatedly to select “TUNE MODE”.
3. Press the arrow up ▲ or down ▼ to select “MANUAL” and then press [OK].
4. Press the Skip back or Skip forward button to tune in the station. To tune automatically, press and hold the button until the frequency starts changing quickly.

Memory presetting

You can preset up to 30 FM stations.

Presetting stations automatically

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] to select “A.PRESET”.
3. Press the arrow up ▲ or down ▼ to select “LOWEST” or “CURRENT” and then press [OK].
   • LOWEST: To begin auto preset with the lowest frequency.
   • CURRENT: To begin auto preset with the current frequency.
4. The tuner starts to preset all the stations it can receive into the channels in ascending order.
5. To cancel, press the Stop [■] button.

Manual Presetting

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] repeatedly to select “TUNE MODE”.
3. Press the arrow up ▲ or down ▼ to select “MANUAL” and then press [OK].
4. Press the Skip back or Skip forward button to tune in the station.
5. Press [OK].
6. Press the arrow up ▲ or down ▼ to select a preset number and then press [OK].
7. Repeat steps 3 to 6 to preset more stations. The new station replaces any station that occupies the same preset number.

Selecting a preset station

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] repeatedly to select “TUNE MODE”.
3. Press the arrow up ▲ or down ▼ to select “PRESET” and then press [OK].
4. Press the Skip back or Skip forward button to select a preset station.

Improving the sound quality

1. Press the [RADIO] button to select "FM".
2. Press the [PLAY MENU] button repeatedly to select “FM Mode”.
3. Press the arrow up ▲ or down ▼ to select “MONO” and then press [OK].
4. To cancel select “Stereo". “MONO" is also cancelled when you change the frequency.

Manual tuning

1. Press [RADIO] to select “FM or AM”.
2. Press the rewind or fast forward button to tune in the station. To tune automatically, press and hold the button until the frequency starts changing quickly.

Memory presetting

30 FM and 15 AM stations can be preset.

Automatic presetting

1. Press [RADIO] to select “FM or AM”.
2. Press [OK] to select “LOWEST” or “CURRENT” frequency.
3. Press [RADIO MENU] to select “A.PRESET” and then press [OK].
4. “START”is shown, press [OK] to start presetting.

Manual presetting

1. Press [RADIO] to select “FM or AM”.
2. Press the rewind or fast forward button to tune in the station.
3. Press [PROGRAM].
4. Press the numeric buttons to select a preset number.
5. Do steps 1 through 4 again to preset more stations. The new station replaces any station that occupies the same preset number.

Selecting a preset station

Using the remote control

1. Press [RADIO] to select “FM or AM”.
2. Press the numeric buttons, or Press the Skip back or Skip forward button to select a preset station.

Using the Main Unit

1. Press [RADIO] to select “FM or AM”.
2. Press the Skip back or Skip forward button to select a preset station.

Improving the sound quality

When "FM" is selected

1. Press [RADIO MENU] to select “FM Mode”.
2. Press the arrow left ◄ or right ► to select “MONO" and then press [OK].
3. To cancel select “Stereo". “MONO" is also cancelled when you change the frequency.

When "AM" is selected

1. Using the remote control Press [RADIO MENU] to select “B.PROOF”.
2. Press the arrow left ◄ or right ► to select “BP 1" or “BP 2" and then press [OK].

Manual tuning

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] repeatedly to select “TUNE MODE”.
3. Press the arrow up ▲ or down ▼ to select “MANUAL” and then press [OK].
4. Press the Skip back or Skip forward button to tune in the station. To tune automatically, press and hold the button until the frequency starts changing quickly.

Memory presetting

You can preset up to 30 FM stations.

Presetting stations automatically

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] to select “A.PRESET”.
3. Press the arrow up ▲ or down ▼ to select “LOWEST” or “CURRENT” and then press [OK].
   • LOWEST: To begin auto preset with the lowest frequency.
   • CURRENT: To begin auto preset with the current frequency.
4. The tuner starts to preset all the stations it can receive into the channels in ascending order.
5. To cancel, press the Stop [■] button.

Manual Presetting

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] repeatedly to select “TUNE MODE”.
3. Press the arrow up ▲ or down ▼ to select “MANUAL” and then press [OK].
4. Press the Skip back or Skip forward button to tune in the station.
5. Press [OK].
6. Press the arrow up ▲ or down ▼ to select a preset number and then press [OK].
7. Repeat steps 3 to 6 to preset more stations. The new station replaces any station that occupies the same preset number.

Selecting a preset station

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] repeatedly to select “TUNE MODE”.
3. Press the arrow up ▲ or down ▼ to select “PRESET” and then press [OK].
4. Press the Skip back or Skip forward button to select a preset station.

Improving the sound quality

1. Press the [RADIO] button to select "FM".
2. Press the [PLAY MENU] button repeatedly to select “FM Mode”.
3. Press the arrow up ▲ or down ▼ to select “MONO” and then press [OK].
4. To cancel select “Stereo". “MONO" is also cancelled when you change the frequency.

Manual tuning

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] repeatedly to select “TUNE MODE”.
3. Press the arrow up ▲ or down ▼ to select “MANUAL” and then press [OK].
4. Press the Skip back or Skip forward button to tune in the station. To tune automatically, press and hold the button until the frequency starts changing quickly.

Memory presetting

You can preset up to 30 FM stations.

Presetting stations automatically

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] to select “A.PRESET”.
3. Press the arrow up ▲ or down ▼ to select “LOWEST” or “CURRENT” and then press [OK].
   • LOWEST: To begin auto preset with the lowest frequency.
   • CURRENT: To begin auto preset with the current frequency.
4. The tuner starts to preset all the stations it can receive into the channels in ascending order.
5. To cancel, press the Stop [■] button.

Manual Presetting

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] repeatedly to select “TUNE MODE”.
3. Press the arrow up ▲ or down ▼ to select “MANUAL” and then press [OK].
4. Press the Skip back or Skip forward button to tune in the station.
5. Press [OK].
6. Press the arrow up ▲ or down ▼ to select a preset number and then press [OK].
7. Repeat steps 3 to 6 to preset more stations. The new station replaces any station that occupies the same preset number.

Selecting a preset station

1. Press the [RADIO] button to select "FM".
2. Press [PLAY MENU] repeatedly to select “TUNE MODE”.
3. Press the arrow up ▲ or down ▼ to select “PRESET” and then press [OK].
4. Press the Skip back or Skip forward button to select a preset station.

Improving the sound quality

1. Press the [RADIO] button to select "FM".
2. Press the [PLAY MENU] button repeatedly to select “FM Mode”.
3. Press the arrow up ▲ or down ▼ to select “MONO” and then press [OK].
4. To cancel select “Stereo". “MONO" is also cancelled when you change the frequency.

Manual tuning

1. Press [RADIO] to select “FM”.
2. Press the rewind or fast forward button to tune in the station.. To tune automatically, press and hold the button until the frequency starts changing quickly.

On the unit

1. Press [RADIO MENU] repeatedly to select “TUNE MODE".
2. Press the arrow right ► or left ◄ to select “MANUAL” and then press [OK].
3. Press the Skip back or Skip forward button to tune in the station.

Memory presetting

You can preset up to 30 FM stations.

Presetting stations automatically

1. Press the [RADIO] button to select "FM".
2. Press [RADIO MENU] to select “A.PRESET”.
3. Press the arrow right ► or left ◄ to select “LOWEST” or “CURRENT” and then press [OK].
   • LOWEST: To begin auto preset with the lowest frequency.
   • CURRENT: To begin auto preset with the current frequency.
4. The tuner starts to preset all the stations it can receive into the channels in ascending order.
5. To cancel, press the Stop [■] button.

Presetting Stations Manually

1. While listening to a station press [PROGRAM].
2. Press the numeric buttons to select a preset number.

Do steps 1 through 2 again to preset more stations.

A station previously stored is overwritten when another station is stored in the same channel preset.

Selecting a preset station

1. Press [RADIO] to select “FM”.
2. Press the Skip back or Skip forward button to select a preset station.

On the unit

1. Press [RADIO MENU] repeatedly to select “TUNE MODE".
2. Press the arrow right ► or left ◄ to select “PRESET” and then press [OK].
3. Press the Skip back or Skip forward button to select a preset station.

Changing the stations stored under [1] to [5]

Channel 1 to 5 will be set as the favorite stations under [FAVORITE] [1] to [5].

On the main unit

1. While listening to a station press and hold one of the 1 - 5 buttons until "P1, P2, P3, P4 or P5"" appears on the display.

When you change the stations stored under [1] to [5], channel 1 to 5 are also changed to the same corresponding stations.

Manual tuning

1. Press [PLAY MENU] repeatedly to select “TUNEMODE”.
2. Press up down arrow to select "MANUAL" and press OK.
3. Press the rewind or fast forward button to tune in the station. To tune automatically, press and hold the button until the frequency starts changing quickly. "STEREO" is shown when a tereo broadcast is being received.

Memory presetting

You can preset up to 30 FM stations.

Presetting stations automatically

1. Press the [PLAY MENU] button to select "A.PRESET".
2. Press the arrow Up or arrow down to select “LOWEST” or “CURRENT” and then press [OK].
   • LOWEST: To begin auto preset with the lowest frequency.
   • CURRENT: To begin auto preset with the current frequency.
3. The tuner starts to preset all the stations it can receive into the channels in ascending order.
4. To cancel, press the Stop [■] button.

Presetting Stations Manually

1. While listening to a station press [PLAY MENU] repeatedly to select "TUNEMODE".
2. Press the up arrow or down arrow to select "MANUAL".
3. Press or button to tune in to the station.
4. Press OK
5. Press Up arrow or down arrow to select preset number and then press OK.
   Do steps 3 through 5 again to preset more stations.
   The new station replaces any station that occupies the same preset number.

Selecting a preset station

1. Press [PLAY MENU] to select “TUNEMODE”.
2. Press up arrow or down arrow to select "PRESET" and then press OK.
3. Press the or button to select a preset station.

On the unit

1. Press [RADIO MENU] repeatedly to select “TUNE MODE".
2. Press the arrow right ► or left ◄ to select “PRESET” and then press [OK].
3. Press the Skip back or Skip forward button to select a preset station.

Improving the sound quality

1. Press [PLAY MENU] repeatedly to select “FM Mode”.
2. Press the arrow up or down arrow to select “MONO" and then press [OK].
   To memorize the setting Continue with step 4 of “Manual presetting".

Checking the signal status

1. Press DISPLAY
   FM ---- The FM signal is weak. The system is not tuned in to a station.
   FM ST The FM signal is in Stereo.
   FM MONO "MONO" is selected as the "FM MODE". The FM signal is in monaural.

FM allocation setting
This system can also receive FM broadcasts allocated in 0.1 MHz steps.

1. Press RADIO.
2. Press and hold SELECTOR on the main unit.
   After a few seconds, the display panel shows the current minimum radio frequency. Release the button when the minimum frequency changes.
   • To go back to the initial setting, do the above steps again.
   • Preset frequencies are erased after you change the setting.