Troubleshooting - The TV's Sound is not heard from this system. - SC-HTB01
Troubleshooting - The TV's Sound is not heard from this system. - SC-HTB01
Possible cause and solutions
Check connections to the other device.
Turn this system off and then on again.
If this system is connected to a TV with an HDMI cable,
check that the TV’s HDMI terminal is labelled “HDMI (ARC)”. If not, the TV's sound
cannot be output from this system. When using a TV with an HDMI
terminal that is not labelled “ARC”, connect the DIGITAL AUDIO OUT
(OPTICAL) of the TV and the OPTICAL DIGITAL AUDIO IN (TV)
terminal using an optical digital audio cable (not supplied).
If this system is connected to a Panasonic TV (VIERA), when
you turn on this system by operating it directly, sound may not
be output from it. In this case, turn on this system via VIERA
Link by operating the remote control of the TV (VIERA).
If the connections are correct, there might be a problem
with the cables. Redo the connections with different cables.
Check the audio output settings on the connecteddevice.
Use the following procedure to check for the input
signalfrom the connected device.
Press [INPUT] to switch to the input
source forthe input signal you want to
check.
Press and hold [VOL
-] on this system and[CINEMA] on
the remote control at the sametime for 4 or
more seconds.The CLR DIALOG indicator blinks
and the 3DSRND
indicator lights up.
Orange Lights: There is an audio signal being input
If there is an audio signal being input, it is
possible that this system is malfunctioning. Turn
this system off, unplug the AC adaptor, and then
consult your dealer
Green Lights: There is no audio signal being input
If there is no audio signal being input, it is
possible that there is a problem with the
connection cable. Try connecting with another cable
if you have one. If sound is still not output,
there is either a problem with the settings on the
connected device or there is a malfunction. Refer
to the operating instructions for the connected
device