Models TC-32AS500, TC-39AS500
Check the settings in the "Timer" menu.
- Press [MENU]
- Select "Timer"
- Check the "No activity for 4 hours" setting as well as the "No signal for 10 minutes" setting.
- Select "Stay on" for both if you do not want the television to turn off automatically.
Note:
No Activity for 4 hours
- To conserve energy, the TV automatically turns off when there is no operation of the
remote and side panel key for more than 4 hours. - If the “On/Off Timer” is set. "No activity for 4 hours will not be in use.
- “No activity for 4 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No activity for 4 hours” feature.
- The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
No signal for 10 minutes
- To conserve energy, the TV automatically turns off when NO SIGNAL and NO
OPERATION continue for more than 10 minutes. - Not in use when “On/Off Timer” is set.
- “No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No signal for 10 minutes” feature.
- The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
Models TC-39AS530, TC-50AS530, TC-55AS530, TC-60AS530
Models TC-39AS540, TC-50AS540, TC-55AS540, TC-60AS540
Models AS560
Models AS630
Models AS660
Models AS680
Models AS800
Models AX800
Models AX850
Models AX900
Models C400
Models CS540
Models CS560
Models CX400
- Press [MENU] and select "SETUP".
- Press [OK]/[►].
- Press [◄]/[►] to select "SYSTEM" and press [OK].
- Press [▲]/[▼] to select "TIME" and press [OK].
- Press [▲]/[▼] to select "Sleep Timer" and select "Off".
Models CX420
Models CX600
Check the settings in the "Eco Navigation" and "Timer" menu.
In Eco Navigation Menu
- Press [MENU]
- Select "Setup"
- Select " Eco Navigation"
- Check the "No activity for 4 hours" setting as well as the "No signal for 10 minutes" setting.
- Select "Stay on" for both if you do not want the television to turn off automatically.
In Timer Menu
- Press [MENU]
- Select "Timer"
- Check the "No activity for 4 hours" setting as well as the "No signal for 10 mintes" setting.
- Select "Stay on" for both if you do not want the television to turn off automatically.
Note:
No Activity for 4 hours
- To conserve energy, the TV automatically turns off when there is no operation of the
remote and side panel key for more than 4 hours. - If the “On/Off Timer” is set. "No activity for 4 hours" will not be in use.
- “No activity for 4 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No activity for 4 hours” feature.
- The on-screen display will flash "3", "2" and "1" to indicate the last three (3) remaining
minutes prior to the shut-off.
No signal for 10 minutes
- To conserve energy, the TV automatically turns off when No Signal and No
Operation continue for more than 10 minutes. - Not in use when “On/Off Timer” is set.
- “No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No signal for 10 minutes” feature.
- The on-screen display will flash "3", "2" and "1" to indicate the last three (3) remaining minutes prior to the shut-off.
Models CX650
Models CX800
Models CX850
Models DS600
Models DS630
Models DX650
Models DX700
Models DX800
Models DX900
Models ES600
Models EX600
Models EX601
Models EX750
Models EZ1000
Models EZ950
Models FX600
Models FX700
Models FX800
Models FZ1000
Models FZ950
Models GZ1000
Models GZ2000
Models GX700
- Press [MENU].
- Select "Setup" and press [OK].
- Press [▼] and select "Time setup" and press [OK].
- Press [▼] and select "Time" and press[OK].
- Press [▼] and select "Power Off Timer" and press [OK].
- Press the [▼] to select "Off" and press [OK].
- Press [RETURN] and press [▼] to select "Sleep Timer" and press [OK}.
- Press [▼] to select "Off" and press [OK].
- Press [▼] to sleect "Auto Sleep" and press [OK].
- Press [▼] to select "Off" and press [OK].
- Press [▼] to select "No signal Power off" and press [OK].
- Press [▼] and select "Off" and press [OK].
- Press [Exit] to return back to your video display.