SB-C700
This unit incorporates protection circuitry to protect it from damage caused by excessive input or abnormal signals. When excess input is detected, input is automatically interrupted.
If sound is interrupted:
- Reduce the volume of the receiver (or amplifier).
- Check the sound source and connections for any problems.
If there is no problem, the protection circuitry will reset in a few minutes.
After the protection circuit is reset, take care not to increase the receiver’s volume too high.
SB-R1
This unit incorporates protection circuitry to protect it from damage caused by excessive input or abnormal signals. When excess input is detected, input is automatically interrupted.
If sound is interrupted:
- Reduce the volume of the receiver (or amplifier).
- Check the sound source and connections for any problems.
If there is no problem, the protection circuitry will reset in a few minutes.
After the protection circuit is reset, take care not to increase the receiver’s volume too high.
SL-C700
Depending on your environment, the audio may be interrupted during playback.
- Check the operating instructions of the connected device.
- Check the connection to the device.
ST-C700
Depending on your environment, the audio may be interrupted during playback.
- Check the operating instructions of the connected device.
- Check the connection to the device.
ST-G30
Possible Causes and Solutions
- If the signal is interrupted, changing the location and angle of the broadband router may improve the signal reception of the connected device.
- If several wireless devices are simultaneously using the same wireless network as this unit, try turning off the other devices or reducing their wireless network usage.
- If playback has stopped, check the playback status on the smartphone, tablet, or connected device.
SU-G30
Depending on your environment, the audio may be interrupted during playback.
- Check the operating instructions of the connected device.
- Check the connection to the device.