Troubleshooting - The shaver, trimmer, grooming product cannot be charged. Operating time is short even after charging.
Troubleshooting - The shaver, trimmer, grooming product cannot be charged. Operating time is short even after charging.
Not Charging
Make sure the AC adapter is securely attached and not
damaged.
Make sure to charge at the recommended ambient temperature.
Common temperature for charging is 0-35 °C (32 °F - 95 °F). For model ES-CMA3A-K, ES-CMAA-V, ES-CM3A-W temperature for charging is 10-35 °C
Battery performance may decrease outside of the recommended
temperature. Refer
to your models Operating Manual for specific ambient
temperature range.
For models with a charging stand
Make sure the main body is in the charging stand all the
way and make sure the charge status lamp glows.
Gently wipe the body terminals and the charging terminals
of the charging stand with a cloth or tissue damped with water.
For models with self cleaning chargers
Gently wipe the main body rear terminals and the charging
terminals of the self-cleaning recharger with a cloth or tissue
dampened with water.
Charge time can be improved by cleaning every time after
shaving. Refer to
"How to clean a shaver".
Although the shaver, trimmer can be used for a set period
after a full charge that number is assuming dry-shave usages
for 3 minutes per day, the usable length of time might be lower
depending on how the product is used (for example, when used
for wet shaving or extended use.).
When the number of operations per charge starts to
decrease, the battery is nearing the end of its life. Please
contact a service repair center authorized by Panasonic for a
replacement if applicable. Refer to How to replace the battery to confirm if it can be replaced
When shaving make sure the appliance is not pressed against
your skin too hard. Contact to skin with gentle force.
Palm shavers: models ES-CM3A-K, ES-CM3A-V, ES-CM3A-W; Check whether the USB cable is securely connected to
the power supply. Remove the USB cable and insert it again.
If the Type-C plug heats up, disconnect the power supply, check the socket, and remove any water or foreign objects from the socket.
