Flashes
The copyright protected disc cannot be played back.
One of the devices connected to this unit (TV, amplifier, etc.) does not support copyright protection.
Flashes 3 times
The disc in use cannot be played back since the copyright information is invalid.
- For models with a USB port confirm a firmware update using a USB device is completed.
Flashes 4 times
The unit fails to operate properly. Press [
] on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
Flashes 6 times
The remote control and this unit are using different
codes.
Turn on this unit by using the standby/on switch on this
unit, and check “Remote control ?” which is displayed
on the screen when you press a button on the remote
control.
Press and hold [OK] and the displayed number for at least 5
seconds.
flashes 6 times and stops for every 2 blinks
The remote control and this unit are using different
codes. Turn on this unit by using [] on the main unit, and check “Remote Control [
] (number)” which is
displayed on the screen when you press a button on the
remote control. Press and hold [OK] and the displayed
number for at least 5 seconds.
The power LED flashes continuously
- The copyright protected disc cannot be played back. One of the devices connected to this unit (TV, amplifier, etc.) does not support copyright protection.
- Temperature of this unit is hot and the unit switches to standby for safety reasons.Wait for about 30 minutes. Install or place this unit with good ventilation.
- A firmware update is in progress.