No Power on a Technics Turntable

Problem

The turntable does not power on when pressing the power button.

Cause

• The AC mains lead is not firmly plugged into the outlet.
• The control unit connection cable is not properly inserted (if applicable to your turntable model).
• The turntable’s power cord may be damaged.
• The turntable is designed to delay responses if powered on and off quickly (SL-1500C only).

Solution

1. Check the Power Connection
   • Ensure the AC mains lead is firmly plugged into a working power outlet.
   • Unplug the turntable, check for any damage to the power cord, and plug it back into the outlet securely.
2. Confirm Control Unit Connection (if applicable)
   • For turntables with a separate control unit, verify that the control unit connection cable is securely attached to the main unit.
   • Insert the control unit cable firmly until it clicks.
3. Restart the Turntable (SL-1500C Only)
   • If the unit was powered on and powered off quickly, it is intentionally designed to delay immediate responses.
   • Wait at least 3 seconds before attempting to restart the turntable.
4. Test the Power
   • After completing the steps above, press the power button to confirm if the issue is resolved.

Additional Notes

For specific details about your turntable model, refer to your model's Operating Manual.