Home
>
Network Connection - Cannot Select This System as the Output Speakers

Network Connection - Cannot Select This System as the Output Speakers

Problem: You are unable to select your Technics system as the output speakers on your network-connected device.

Possible Causes and Solutions

1. Devices Are on Different Networks

Cause: The Technics system and the connected devices (e.g., smartphone, tablet, or computer) are not on the same network.

Solution: Ensure that all devices, including your Technics system and connected devices, are connected to the same Wi-Fi network.

2. Network Connection Issue

Cause: The devices may have a weak or unstable connection to the network.

Solution: Reconnect all devices, including the Technics system, to the network. Ensure the Wi-Fi signal is strong and stable.

3. Wireless Router Problem

Cause: The router may need a restart to resolve temporary connectivity issues.

Solution: Turn the wireless router off, wait a few minutes, and then turn it back on. Allow all devices to reconnect to the network.

4. Technics System Not Detected

Cause: The Technics system may need to refresh its connection to the network.

Solution: Turn the Technics system to standby mode, then power it back on. Afterward, select the Technics system as the output speakers again.

Additional Tips

  • Firmware Updates: Ensure the Technics system firmware is up to date. Visit the Global Support Site for updates.
  • Restart Devices: Restart the connected devices (e.g., smartphone, tablet) to ensure they can detect the Technics system.
  • Check Network Band: Verify that both the Technics system and connected devices are on the same network band (2.4 GHz or 5 GHz) for better compatibility.

By addressing these causes and following the solutions, you should be able to resolve the issue and select your Technics system as the output speakers.