To operate
- Press the OFF/ON
switch. For model ES-RW30, ES-RT51, depress the switch lock
button, and slide the OFF/ON switch upwards.
- Hold the shaver as illustrated and shave.
Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver back
and forth in the direction of your beard. You may gently
increase the amount of pressure as your skin becomes accustomed
to this shaver. Applying excessive pressure does not provide a
closer shave.
Notes for Models ES-8103, ES-8243
- Use to select “SOFT” (soft) or “LOCK” (lock). You can
change the pivot action whether the shaver is turned on or off.
Notes for models ES-LT3N, ES-LT7N, ES-LT5N
- The power cannot be turned on when the switch lock lamp
blinks, as the power switch is locked.
Press the power switch for more than 2 seconds to unlock.
- If you press the power switch for more than 2 seconds, the
sonic vibration cleaning mode is activated. You cannot shave in
this mode.
- Do not place your fingers on the power switch while using
the shaver. This may cause the shaver to lock the power switch
or turn off. Place your fingers on the thumb rest while using
the shaver.
- The appliance may not operate in an ambient temperature
approximately 5 °C (41 °F) or lower.
- Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
- The shaving sensor may not respond depending on the type of
the shaving gel and shaving foam, but this is normal.
- The shaving sensor may not respond when the remaining
battery capacity is low. If this happens, recharge the shaver.
- Avoid the following situations to prevent damaging the
system outer foil. Applying pressure to any part of the system
outer foil or bringing the system outer foil into contact with
hard object may cause damage on the system outer foil.
- Shaving with only a part of the system outer foil.
- Finger or nail coming into contact with the system
outer foil.
Switching the shaver
head.
- You can change the pivot action.
-
FREE: you can move the
shaver head.
-
LOCK: you can lock the
shaver head.
Notes for model ES-LV67
- The beard under the chin and around the throat can be
shaved better by stretching the skin so the beard will stand.
- To prevent damaging the system outer foil, do not shave
with only a part of the system outer foil.
- While using, the remaining battery capacity are shown and
then turn off after 5 seconds.
- Approximate amount of battery capacity is displayed as 20 -
100.
- The shaving sensor lamp blinks.
- After use, the remaining battery capacity blink and then
turn off after 5 seconds.
- When the battery capacity is low, "20" blinks when
operating the shaver. You can shave 2 to 3 times after “20”
blinks. (This will differ depending on usage.)
- The appliance may not operate in an ambient temperature
lower than approximately 5 °C (41 °F).
- The shaving sensor may not respond depending on the type
and quantity of the shaving gel. This is not abnormal.
- Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
- To prevent erroneous operation, place your fingers on the
thumb rest while using the shaver.
- The sonic vibration cleaning mode is activated when the
power switch is pressed for more than 2 seconds while the
shaver is not operating. You cannot shave in this mode.
This frequently asked question applies to models ES-8103,
ES-RW30, ES-8243, ES-LT3N, ES-LT7N, ES-RT51/31, ES-SL41,
ES-LT5N, ES-LV67
