Applicable Shooting modes
For models DC-S1, DC-S1R, DC-S1H:
For models DC-FZ1000M2, DC-G95:
- Set the drive mode dial to [Self timer].
- Decide on the composition and then adjust the focus.
- Press the shutter button halfway.
- The focus and exposure are fixed when the shutter
button is pressed halfway.
- Start recording.
- Press the shutter button fully.
- The self-timer lamp blinks and then the shutter is
released.
Setting the Self-timer Time
For models DC-S1/DC-S1R/DC-S1H:
[Menu/Set] → [Still shooting] →
[Still Shooting
Settings] → [Self Timer]
For models DC-FZ1000M2, DC-G95:
[Menu] → [Rec] →
[Self-Timer]
Different Self-Timer settings
Icon
|
Settings
|
Description
|
[10 second timer
icon]
|
10 Second Timer
|
Takes a picture after 10 seconds.
|
[10 Second self-timer
icon]
|
10 Second Self-Timer
|
Takes 3 pictures at approx. 2 second intervals after 10
seconds.
|
[2 second timer
icon]
|
2 Second Timer
|
Takes a picture after 2 seconds.
- This setting is a convenient way to avoid camera
blur caused by pressing the shutter button.
|
Note:
- We recommend using a tripod when recording with the
self-timer.
- When the following functions are being used,
[10 Second
Self-Timer] is not available:
- Filter Settings: Simultaneous Record without Filter
- Bracket recording
- Multiple Exposure
- The self-timer does not work while you are using the
following functions:
- High Resolution Mode
- Post-Focus
-
For models DC-FZ1000M2, DC-G95: This
function is not available in the following cases:
- During motion picture recording