Night / Silent mode allows you to select a period of time
during which the handset and/or base unit will not ring for
outside calls. This feature is useful for time periods when you do not want to
be disturbed, for example, while sleeping.
Night / Silent mode can be set for each unit. Using the phonebook’s group feature, you can also select groups
of callers whose calls override Night / Silent mode and ring
the unit (Call Display subscribers only). (Not available on all
models)
Important:
- Make sure the unit’s date and time setting is correct.
- We recommend turning the base unit ringer off in addition
to turning the Night / Silent mode on.
- For models with alarm mode feature - If you have set the
alarm, the alarm sounds even if the Night / Silent mode is
turned on.
Programming Method 1 - How to set Night/Silent mode on the
Handset
- Press [ MENU # 2 3 8
].
- Press the arrow up ▲ or down ▼ button to select the desired
setting.
- Press [ SAVE ].
- If you select "Off" press [ OFF ] to exit programming.
- Enter the desired hour and minute you wish to start this
feature.
- Press the Asterisk button[ *
] to select "AM" or
"PM".
- Press [ OK ].
- Enter in the desired hour and minute you wish to end this
feature.
- Press the Asterisk button [
* ] to select
"AM" or "PM".
- Press [ SAVE ].
- Press [ OFF ].
Programming Method 2 - How to set the Night/Silent mode on the
Base Unit
For models with separate ringer on base.
These instructions are for programming on the base unit. If
your unit does not have programming on the base unit refer to
Progamming Method 3.
- Press [ MENU # 2 3 8
].
- Press ▲ or ▼ to select the desired setting.
- Press [ SAVE ].
- If you select "Off" press [ EXIT ] to exit.
- Enter the desired hour and minute you wish to start this
feature.
- Press [ AM/PM ] to
select "AM" or
"PM".
- Press [ OK ].
- Enter in the desired hour and minute you wish to end this
feature.
- Press [ AM/PM ] to
select "AM" or
"PM".
- Press [ SAVE ].
- Press [ EXIT ].
Programming Method 3 - How to set the Night/Silent mode on the
Base Unit
For models with separate ringer on base.
These instructions are for programming the base unit
Night/Silent mode, using the telephone handset to program.
- Press [ MENU #
* 2 3 8 ].
- Press the arrow up ▲ or down ▼ button to select the desired
setting.
- Press [ SAVE ].
- If you select "Off" press [ OFF ] to exit programming.
- Enter the desired hour and minute you wish to start this
feature.
- Press the Asterisk button[ *
] to select "AM" or
"PM".
- Press [ OK ].
- Enter in the desired hour and minute you wish to end this
feature.
- Press the Asterisk button [
* ] to select
"AM" or "PM".
- Press [ SAVE ].
- Press [ OFF ].
Selecting groups to bypass night mode (not available on all
models)
- Press [MENU 2 4 1].
- Press the arrow up ▲ or down ▼ button to select the desired
group.
- Press [ SELECT ]. A
check mark
is displayed next to the selected
group numbers. To cancel the selected group press [ SELECT ]
again, the check mark disappears.
- Press [ SAVE ].
- Press [ OFF] if
programming from a handset or
Press [ EXIT ] if
programming from the base unit.
Refer to
your models Operating Manual for specific procedure.
