How to use the Lullaby feature. - Baby Monitor

You can select from a range of lullabies and manually play them from the camera unit, or cancel them.

Make sure to check the camera unit’s speaker volume before playing lullabies.

Selecting a Lullaby

1. Press the Power button located on the top of the monitor unit for about 2 seconds to turn the unit on.
2. Press [ MENU ].
3. Press the arrow up ▲ or down ▼ button to select "Lullaby".
4. Press [ OK ].
5. Press the arrow up ▲ or down ▼ button to select "Sound List".
6. Press [ OK ].
7. Press the arrow up ▲ or down ▼ button to select the desired setting. To cancel a lullaby press the arrow up ▲ or down ▼ button to select "OFF".
8. Press [ OK ].
9. Press [ MENU ] repeatedly to exit.

Note:

• Lullabies can also be canceled by pressing the pairing button on the back of the camera unit. 
• If the monitor unit is turned off while selecting lullabies, the lullaby will continue to play from the camera unit for the specified time.

Selecting a lullaby play time

1. Press [ MENU ].
2. Press the arrow up ▲ or down ▼ button to select "Lullaby".
3. Press [ OK ].
4. Press the arrow up ▲ or down ▼ button to select "Play Time". Play time options 5 min - 120 min (default 15 min).
5. Press [ OK ].
6. Press the arrow up ▲ or down ▼ button to select the desired play time.
7. Press [ OK ].
8. Press [ MENU ] repeatedly to exit.

To set an Auto lullaby

You can configure lullabies to be played automatically from the camera unit when sound is detected.

Make sure to check the camera unit’s speaker volume before playing lullabies.

Auto lullaby does not function during the following.

• while using or for 5 seconds after using the pan/tilt.
• while talking to the camera unit.
• while configuring lullabies to be played.

Configuring the sound settings

1. Press [ MENU ]
2. Press the arrow up ▲ or down ▼ button to select "Auto Lullaby". 
3. Press [ OK ].
4. Press the arrow up ▲ or down ▼ button to select "Sound List". 
5. Press [ OK ].
6. Press the arrow up ▲ or down ▼ button to select the desired lullaby. To turn off lullabies press the arrow up ▲ or down ▼ button to select "OFF".
7. Press [ OK ].
8. Press [ MENU ] repeatedly to exit.

Note: If the monitor unit is turned off while selecting lullabies, the lullaby will continue to play from the camera unit for the specified time.

Configuring the sound detection level

You can adjust the level at which sound is detected. Increase or decrease the detection level needed to trigger the sound sensor.

1. Press [ MENU ].
2. Press the arrow up ▲ or down ▼ button to select "Auto Lullaby". 
3. Press [ OK ].
4. Press the arrow up ▲ or down ▼ button to select "Sound Detect Level". 
5. Press [ OK ].
6. Press the arrow up ▲ or down ▼ button to select the desired setting. (Options High or Normal (default)).
7. Press [ OK ].
8. Press [ MENU ] repeatedly to exit.

Note:  This feature can only be selected when a lullaby is selected for “Sound List”.

Configuring the detection time

1. Press [ MENU ].
2. Press the arrow up ▲ or down ▼ button to select "Auto Lullaby". 
3. Press [ OK ].
4. Press the arrow up ▲ or down ▼ button to select "Detection Time". 
5. Press [ OK ].
6. Press the arrow up ▲ or down ▼ button to select the desired setting. (Options 15, 30, 45, 60 (default) or 90 seconds).
7. Press [ OK ].
8. Press [ MENU ] repeatedly to exit.

Note:  This feature can only be selected when a lullaby is selected for “Sound List”.

Configuring the play time

You can specify how long the camera unit plays lullabies when sound is detected.

1. Press [ MENU ].
2. Press the arrow up ▲ or down ▼ button to select "Auto Lullaby". 
3. Press [ OK ].
4. Press the arrow up ▲ or down ▼ button to select "Play Time". 
5. Press [ OK ].
6. Press the arrow up ▲ or down ▼ button to select the desired setting. (Options 5 min. to 120 min. the default is 15 min.)
7. Press [ OK ].
8. Press [ MENU ] repeatedly to exit.

Note:  This feature can only be selected when a lullaby is selected for “Sound List”.