The following operations can be performed using this unit:
- When a card has not been inserted: Pictures can be recorded on the built-in memory and played back
- When a card has been inserted: Pictures can be recorded on the card and played back
- When using the built-in memory
Built in
memory
- The access indication is displayed in red when pictures
are being recorded on the built-in memory or SD card.
- When using the card
SD Card
in use
- The access indication is displayed in red when pictures
are being recorded on the built-in memory or SD card.
Built-in Memory
- You can copy the recorded pictures to a card.
- DMC-TS30 Memory size: Approx. 220 MB
- DMC-TS6 Memory size: Approx. 10 MB
- The access time for the built-in memory may be longer than
the access time for a card.
SD Card
The following cards, which conform to the SD video standard,
can be used with this unit. These cards are indicated as card
in the text.
Memory Card Information
Memory Card
|
Remarks
|
SD Memory Card 8 MB to 2 GB)
|
- Use a card with SD Speed Class with “Class 4” or
higher when recording motion pictures.
- SD Speed Class is the speed standard regarding
continuous writing. Check via the label on the
card, etc
- SDHC Memory Cards and SDXC Memory Cards can be used
only with their compatible devices.
- Check that the PC and other equipment are
compatible when using the SDXC Memory Cards.
- Only the cards with capacity listed left can be
used.
|
SDHC Memory Card (4 GB to 32 GB)
|
SDXC Memory Card (48 GB, 64 GB)
|
Visit the
Panasonic's global support site to confirm the latest
information.
Note:
- Do not turn this unit off, remove its battery or card, or
disconnect the AC adaptor (optional) when the access indication
is lit (hen pictures are being written, read or deleted, or the
built-in memory or the card is being formatted. Furthermore, do
not subject the camera to vibration, impact or static
electricity. The card or the data on the card may be damaged,
and this unit may no longer operate normally. If operation
fails due to vibration, impact or static electricity, perform
the operation again.
- Write-Protect switch provided when this switch is set to
the lock position, no further data writing, deletion or
formatting is possible. The ability to write, delete and format
data is restored when the switch is returned to its original
position.
- The data on the built-in memory or the card may be damaged
or lost due to electromagnetic waves, static electricity or
breakdown of the camera or the card. We recommend storing
important data on a PC etc.
- Do not format the card on your PC or other equipment.
Format it on the camera only to ensure proper operation.
- Keep the Memory Card out of reach of children to prevent
swallowing.