How to setup my iPhone/Ipad Smart device to the Home Network System.

Preparation

• Make sure you have installed the [Home Network] app on your Smart device.
• Make sure your Smart device can connect to the Internet.
• Make sure the hub and your wireless router are turned on and the hub’s LED indicator is lit in yellow
• Make sure you know the network name (SSID) and password assigned to your wireless router

Initial setup for iPhone, iPad

1. Start the [Home Network] app.
2. Accept the Terms of Use agreement.
3. Tap [Set up the Hub].
4. When prompted, press the [Wi-Fi SETUP] button on the hub. The LED indicator blinks in yellow.
5. Change your Smart device Wi-Fi setting temporarily so that it connects to the hub directly. Open your Smart device [Settings] app.
6. Tap [Wi-Fi]
7. Select “KX-HNB600_panasonic”
8. Enter “00000000” as the password, and then tap [Join]. If more than 1 item named “KX-HNB600” is displayed, wait approx. 10 minutes and perform this procedure from the beginning.
9. Exit the Smart devices settings menu, Start the [Home Network] app again.
10. If necessary, enter the password required to connect to your wireless router and then tap [Next].
    • The hub and your Smart device connect to your wireless router.
    • If prompted, follow the on-screen instructions and connect your Smart device to your wireless router, start the app again, and then tap [Add Mobile Device].
11. When prompted, press the [Wi-Fi SETUP] button on the hub.
    • Your Smart device will be registered to the hub.
12. When prompted, follow the on-screen instructions and set the password used to log in to the hub while away from home.
13. Follow the on-screen instructions to finish setting up the hub.
    • The app’s home screen is displayed when initial setup is complete.