Applicable Recording modes
Applicable Shooting modes
You can set light sensitivity (ISO sensitivity). With the
default settings, you can set ISO100 to 51200 in 1/3 EV
increments. The range that can be set will differ depending on
the functions used.
Setting the light sensitivity
- Press [ISO].
- Select ISO sensitivity.
- Rotate the front, rear or control dial to navigate to
your selection.
- Selection is also possible by pressing
[ISO].
- Confirm your selection.
- Press the shutter button halfway.
Available ISO Settings
|
Settings
|
Information
|
|
[AUTO]
|
The ISO sensitivity is automatically adjusted according
to the brightness. Confirm ISO sensitivity by pressing
the shutter button halfway.
- Still Recording: Maximum
[ISO6400]*1
- Motion Picture Recording: Maximum
[ISO6400]*2
|
|
For models DC-S1, SC-S1H:
[100] to [51200]
|
The ISO sensitivity is fixed at the selected value.
- For model DC-S1, DC-S1H: You can
extend the ISO sensitivity range in between a lower
limit of L.50 and an upper limit of H.204800 by setting
[Extended ISO] to
[ON] in the [Custom]
([Image Quality]) menu.
- For model DC-S1R: You can extend
the ISO sensitivity range in between a lower limit of
L.50 and an upper limit of H.51200 by setting
[Extended ISO] to
[ON] in the [Custom]
([Image Quality]) menu.
|
|
For models DC-S1R:
[100] to [25600]
|
-
*1 Default setting. The upper limit can be
changed with [ISO Sensitivity
(photo)].
-
*2 Default setting. The upper limit can be
changed with [ISO Sensitivity
(video)].
|
Notes:
- Higher ISO sensitivities enable faster shutter speeds even
in dark places, so camera shake and subject blur can be
prevented. However, higher ISO sensitivities also increase the
amount of noise in the recorded images.
- When the following functions are being used, the ISO
sensitivity that can be set is restricted:
- [High Resolution Mode]: Up to an upper
limit of [ISO3200]
- [Filter Settings]: Down to a lower
limit of [ISO100], up to an upper limit of
[ISO6400] (The lower limit changes to
[ISO400] when [High
Dynamic] is set).
- [Multiple Exposure]: Down to a lower
limit of [ISO100], up to an upper limit of
[ISO6400]
- [Standard(HLG)] /
[Monochrome(HLG)] /
[Like2100(HLG)] in [Photo
Style]: Down to a lower limit of
[ISO400]
- For model DC-S1R:
[Standard(HLG)] /
[Monochrome(HLG)] in [Photo
Style]: Down to a lower limit of
[ISO320]
- For models DC-S1, DC-S1R:
- You can set upper and lower limits for ISO auto when
taking pictures:
- Press [MENU / SET] →
[
Still Recording
Menu] → [
Image
Quality] → [ISO Sensitivity
(photo)]
- Press [MENU / SET] →
[
Motion Picture
Recording Menu] → [Image
Quality] → [ISO Sensitivity
(photo)]
- You can change the intervals between ISO sensitivity
settings values:
- Press [MENU / SET] →
[
Custom Menu]
→ [Image
Quality] → [ISO Increments]
- You can change the operation of the
[ISO] button:
- Press [MENU / SET] →
[Custom Menu]
→ [
Operation
Menu] → [WB / ISO / Expo.
Button]
- You can set the upper limit for ISO auto on the ISO
sensitivity settings screen:
- Press [MENU / SET] →
[Custom Menu]
→ [Operation
Menu] → [ISO Displayed
Setting]
