Home
>
How to reset a Technics product

How to reset a Technics product

When the following situations occur, reset the product.

  • There is no response when buttons are pressed.
  • You want to clear and reset the memory contents.

For instructions on resetting a Technics product select your model from the list below.


If your model is not listed Refer to your models Operating Manual for specific procedure.


Models EAH-A800


This unit can be reset when all operations are rejected.

  1. Press and hold the "Power Power button button for 10 seconds or more.

Note

  • All the previous operations will be canceled. (The pairing device information will not be deleted.)
  • The unit cannot be reset immediately after turning on the power of the unit. Wait about 30 seconds.

Models EAH-AZ40


When you want to delete all pairing device information, etc. in the earphones, you can restore the earphones to the factory settings (original settings upon purchase). Follow these steps to successfully perform a factory reset on your True Wireless earbuds.


  1. Put both earphones (Left and Right) into the charging cradle to charge the earphones fully.
  2. Take the Right side earphone out of the charging cradle.
  3. While the earphone LED lights (blue) (about 5 seconds), touch and hold the touch sensor Right for about 7 seconds. The earphone LED will light alternately in blue and red.
  4. Release your finger from the touch sensor Right.
  5. Touch and hold the touch sensor Right for about 10 seconds.The earphone LED (blue) blinks rapidly, and when the power turns off, the earphone returns to the factory settings.
  6. Do the same Steps 2 to 5 above for the Left side earphone.

Note

  • To re-pair the earphones with a Bluetooth® device, delete the registered information (device name: EAH-AZ60 or EAH-AZ40) on the device, then pair the earphones with the Bluetooth® device again.
  • If you are unable to reset, on the connected device select the earphones and "forgot this device" or "delete the earphones" connection. Try the reset steps again.
  • Models EAH-AZ60, EAH-AZ40 - Some setting values, such as the language settings for voice prompts and Amazon Alexa, are kept.

Models EAH-AZ60


EAH-AZ60M2


Using the earphones itself - This will delete all pairing information in the earphones

  1. Put both earphones (L and R) into the charging cradle and charge for about 15 minutes.
  2. Take one earphone (R) out from the charging cradle and wear it.
  3. After you hear the startup sound of earphone, touch and hold the (R) earphone touch sensor.
  4. After you hear the word announcement of "pairing" followed by a melody sound from (R) earphone, release your finger from the (R) earphone touch sensor for 1-2 seconds.
  5. Again Touch and hold (R) earphones touch sensor until you hear a beep followed by the word announcement of "completed.
  6. Put earphone (R) back into the charging cradle.
  7. Repeat steps 1 to 6 above for earphone (L).

Note:After step 4; if you do not hear the word "Pairing" followed by the melody sound even after touching for about 10 seconds, start over from step 1.

Models EAH-AZ70


EAH-AZ80


Models SA-C100



Note

If the setup menu cannot be entered, disconnect the AC power supply cord and reconnect while pressing and holding the Power Power buttonbutton. After approx. 3 minutes or more for restoring all the settings to the factory default. ("Initialized" is displayed.)

Models SA-C600



Note

If the setup menu cannot be entered, disconnect the AC power supply cord and reconnect while pressing and holding the Power Power buttonbutton. After approx. 3 minutes or more for restoring all the settings to the factory default. ("Initialized" is displayed.)

SC-C30


  1. When the unit is on, press and hold the "Power Power button button for 5 seconds or longer while pressing the [DIMMER / -INFO] button.
    • The initialization starts.
  2. After the initialization, this unit restarts.

Model SC-C50


SC-C500


  1. Press [SETUP].
  2. Press the arrow up ▲ or down ▼ button to repeatedly to select “Initialization” and then press [OK].
  3. Press the arrow up ▲ or down ▼ button to select “Yes” and then press [OK].
    • All the settings are set back to the factory defaults. It is necessary to set the memory items again.
  4. Press the arrow up ▲ or down ▼ button to select "Yes” and then press [OK] again.

Models SC-C65



Models SC-C70 and SC-C70MK2


SE-R1


When the unit is off

  1. Press and hold [DIMMER].
  2. While continuing to hold [DIMMER], press the units "ON/Off" button.
  3. Keep holding [DIMMER] until the power indicator and the LAPC indicator blink twice.

SL-C700


Operation with the touch panel on this unit.

  1. Press [ MENU ] repeatedly to select "Setup" and then touch the "Play/Pause Play pause button button.
  2. Press [ MENU ] repeatedly to select "Initialization".
  3. Press the Skip forward or back button to select "Yes", then press touch the "Play pause button button.
  4. Press Skip forward or back button to select "Yes", then touch the "Play/Pause Play pause button button again.

Operation using the SU-700 remote control

  1. Press [ CD ].
  2. Press [MENU ].
  3. Press the arrow up ▲ or down ▼ button repeatedly to select “SETUP” and then press [ OK ].
  4. Press the arrow up ▲ or down ▼ button repeatedly to select “Initialization” and then press [ OK ].
  5. Press the arrow up ▲ or down ▼ button to select “Yes” and then press [ OK ].
  6. Press the arrow up ▲ or down ▼ button to select “Yes” and then press [ OK ] again.

Models SL-G700, SL-G700M2


  1. Press [ NWP ].
  2. Press [ SETUP ].
  3. Press the arrow up ▲ or down ▼ button repeatedly to select “Initialization” and then press [ OK ].
  4. Press the arrow up ▲ or down ▼ button to select “Yes” and then press [ OK ].
    • A confirmation screen appears. Select “Yes” in the following steps to restore all the settings to defaults.
  5. Press the arrow up ▲ or down ▼ button select “Yes” and then press [ OK ] again.

Model ST-C700


  1. Press [ NWP ].
  2. Press [ HOME ].
  3. Press the arrow up ▲ or down ▼ button repeatedly to select “SETUP” and then press [ OK ].
  4. Press the arrow up ▲ or down ▼ button repeatedly to select “Initialization” and then press [ OK ].
  5. Press the arrow up ▲ or down ▼ button to select “Yes” and then press [ OK ].
  6. Press the arrow up ▲ or down ▼ button select “Yes” and then press [ OK ] again.

ST-G30


  1. Disconnect the main unit plug. Before proceeding to Step 2, wait for at least 3 minutes.
  2. Connect the main unit plug while pressing and holding the Power power button button.
    • The main unit will turn off after all the indicators on its front side flash.

All settings will return to the factory defaults. It is necessary to set the memory items again.

SU-C700


When the unit is off

  1. Press and hold the [AMP] button on the remote control.
  2. While continuing to hold the [AMP] button, raise the power switch lever on the main unit to the power ON position style= position." button.
  3. Keep holding [AMP] on the remote until the PC indicator and the COAX2 indicator blink twice.

SU-G30


Models SU-G700, SU-G700M2


  1. Press [ AMP ].
  2. Press [ SETUP ].
  3. Press the arrow up ▲ or down ▼ button repeatedly to select “Initialization” and then press [ OK ].
    • A confirmation screen appears. Select “Yes” in the following steps to restore all the settings to defaults.
  4. Press the arrow up ▲ or down ▼ button to select “Yes” and then press [ OK ].
  5. Press the arrow up ▲ or down ▼ button select “Yes” and then press [ OK ] again.

SU-GX70


Models SU-R1, SU-R1000


Corporate
Business Products
Industrial Products
Sanyo
Panasonic International Support
Electronics Recycling
Important Notices
FZ-G1 Battery Recall
RP-HD605N
Shop Panasonic
Shop Panasonic USA
Shop MultiShape Products
Shop Technics
Shop LUMIX
©2024 Panasonic USA All rights reserved.
About Panasonic
Do Not Sell My Data
Accessibility Statement
Privacy Policy
Terms of use