How to remove and mount the foils and blades on a Multishape Shaver/Trimmer product.

Make sure that the main body is turned off.

Removing and mounting the blade

1. To remove the blade, hold the head, place your thumb against the blades and then push them away from the head.
2. To mount the blade, fit the mounting hook into the blade mounting on the head and then push in until you hear a click.
   

Removing and mounting the head

1. Remove the head while pushing the head release button.
   • Stand the head when it is removed.
2. Mount the head to the main body until it clicks.

Removing and mounting the attachment

1. Remove the attachment from the head.
   
2. Mount the attachment of the desired trimming height to the attached part of the head.
   
3. Push the head in straight until it clicks.
   • After installing, check that it is fixed.

The blade on this product is not replaceable.

If the Blade is dull, clean the product, if cleaning does not improve the sharpness then replace the complete head unit ER-CNT1.

How to remove and mount the Head

Make sure that the main body is turned off.

To Remove

Remove the head while pushing the head release button.

• Stand the head when it is removed.

To Mount

Mount the head to the main body until it clicks.

Removing and Mounting the Outer Foil Section (Head)

1. Remove the frame by pushing the frame (head) release button.
   
2. To mount, securely attach the outer foil section to the head until it clicks.
   

Removing and Mounting the System Outer Foil Section

1. Press the system outer foil release button and pull down the system outer foil.
   
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame
2. Securely attach the system outer foil to the foil frame until it clicks.
   

Removing and Mounting the Blades

1. Remove the the inner blades. Remove the inner blades one at a time.
   
2. Insert the inner blades one at a time.

The blade on this product is not replaceable.

If the Blade is dull, clean the product, if cleaning does not improve the sharpness then replace the complete head unit ER-CNT1.

How to remove and mount the Head

Make sure that the main body is turned off.

To Remove

Remove the head while pushing the head release button.

To Mount

Mount the head to the main body until it clicks.

How to Remove the Blade

1. Remove the comb attachment from the head. Be careful when removing not to cut your hand with the blade.
   
2. Remove the Blade. To remove the blade, hold the head, place your thumb against the blades and then push them away from the head.
   

How to Mount the Blade

1. To mount the blade, fit the mounting hook into the blade mounting on the head and then push in until you hear a click