The charcoal filter should be replaced when it is
noticeably dirty or discolored (usually approximately after 6 to 12
months, depending on usage)
- To remove the charcoal filter, first disconnect
power at the main fuse or circuit breaker, or
pull the plug.
- Remove 2 screws to take the charcoal filter out.
- Remove the the two screws that
hold the charcoal filter in place, as shown.
Once the screws are removed the charcoal
filter can be taken out
- To install a new charcoal filter, remove plastic and other
outer wrapping from the new filter.
- Insert the top of the filter up and into the grooves on both sides of the inside of
the top opening.
- Once you have cleared the bottom tab, push the
bottom of the filter in until it rests in place vertically
behind the tab.
