Follow a simple connection setup procedure pairing to connect
to a smartphone that supports Bluetooth Low Energy. When
pairing is set up, the camera also automatically connects to
the smartphone via Wi-Fi. When pairing is set up, the camera
also automatically connects to the smartphone via Wi-Fi.
- Android™: Android 5.0 or higher with Bluetooth 4.0 or
higher, excluding those that do not support Bluetooth Low
Energy.
- iOS: iOS 9.3 or higher.
First-Time Connection
- You need to set up pairing connection for the first time
only. When pairing is set up, a Wi-Fi connection is made
automatically.
On the Camera
Press [Menu] → [
Setup] →
[Bluetooth] → [Set] →
[Pairing]
- The camera enters pairing standby mode and displays its
device name.
On Your Smartphone
- Start "Image App"
- If a message is displayed indicating that the
smartphone is searching for cameras, close the message.
- Select Bluetooth.
- Turn on the Bluetooth.
- Select the device name displayed on the cmaera's screen
from the Camera enable to be registered list.
- Bluetooth connection between the camera and the
smartphone will be made. For Android devices, a Wi-Fi
connection will be made by selecting Connection.
- Turn on the Wi-Fi function in the setup menu.
- On the Wi-Fi setting screen, select the SSID displayed on
the camera. The device name selected in step 4.
- If the SSID is not displayed, it may be displayed after
the Wi-Fi function is turned off and on.
- When you need to change the connected device, follow
the on-screen message to change the setting.
- Start "Image App"
- The paired smartphone will be registered as a paired
device after connected via Wi-Fi.
If you are using an Android device, follow the steps up to here
to complete the setup. Proceed to the steps below only if you
are using an iOS device, such as iPhone/iPod touch/iPad.
- If Wi-Fi Password is set to off on the camera, select Wi-Fi
Setup. At the time of purchase, Wi-Fi password is set to off.
- If Wi-Fi Password is set to on on the camera, you need to
install the profile.
- Install the profile.
- If a pass code is set on the smartphone, you need to
enter it.
- Press the home button to close the browser.
Connecting to a paired smartphone
On the Camera
Press [Menu] → [Setup] →
[Bluetooth] → [On]
On your smartphone
- Start "Image App" and then select Bluetooth.
- If a message is displayed indicating that the
smartphone is searching for cameras, close the message.
- Turn on the Bluetooth.
- Select the camera device name you want to connect to from
the Camera registered list.
- Even if you set up pairing with more than one
smartphone, you can only connect to one smartphone at a
time.
End Bluetooth connection
Press [Menu] → [Setup] →
[Bluetooth] → [Off]
- The connection will be terminated and the camera's
Bluetooth function will be deactivated.
- Even if you terminate the connection, the pairing
information for it will not be deleted.
Canceling Pairing
On the camera
- [Menu] → [Setup] →
[Bluetooth] → [Set] →
[Delete]
- Select the smartphone you want to delete.
On your smartphone
- Select the camera device name for which to delete the
pairing information from the Camera registered list.
Note:
-
Bluetooth is
displayed on the recording screen during Bluetooth
connection. When the Bluetooth function is enabled, but a
connection is not established,
Bluetooth appears
transluscent.
- When it takes time to set up pairing between a smartphone
and a camera, delete the pairing information of both devices
and register them again. This may enable the devices to be
recognized properly.
- Up to 16 smartphones can be regustered. If you try to
register more than 16 devices, the smartphone with the oldest
registration history will be replaced.
- Performing Reset network Settings will delete registered
device information.
