You can connect a USB device to most Technics Network Audio Players and play back music
stored on the USB device. Follow these steps and refer to your model's Operating Manual
for specific instructions.
General USB Device Information
Supported File Systems:
- FAT16, FAT32, and NTFS file systems are supported.
- USB 2.0 high-speed devices are compatible.
Device Limitations:
- USB devices with a thickness of 8 mm (5/16”) or less are recommended.
- USB hubs or extension cables are not supported.
- USB card reader/writers cannot be used.
- This unit does not support recording music onto a USB device.
File Compatibility:
- Not all files may be read if there are unsupported formats.
- Refer to your model’s Operating Manual for a list of compatible file formats.
Firmware Updates:
- Update your device to the latest firmware, as additional formats may be added via updates. Visit the Global Support Site for firmware updates.
General Connection Steps
- Connect the USB Device: Insert the USB device into the USB-A port on the unit.
- Select USB as the Input Source:
- Use the remote control to press [INPUT] repeatedly until "USB" is displayed.
- Alternatively, use the multi-control knob on the unit to select "USB".
- Browse and Play Content:
- Use the [▲] and [▼] buttons to select folders or files.
- Press [OK] to confirm selections. To go back, press [RETURN].
File Format Support
Below is a combined table of commonly supported file formats across Technics Network Audio Players:
Supported File Formats
| File Format |
Extension |
Sampling Frequency |
Bit Rate/Quantization Bits |
| MP3 |
.mp3 |
32/44.1/48 kHz |
16 to 320 kbps |
| AAC |
.m4a, .aac |
32/44.1/48/88.2/96 kHz |
16 to 320 kbps |
| WAV |
.wav |
Up to 352.8/384 kHz |
16/24/32 bit |
| FLAC |
.flac |
Up to 352.8/384 kHz |
16/24 bit |
| AIFF |
.aiff |
Up to 352.8/384 kHz |
16/24/32 bit |
| ALAC |
.m4a |
Up to 352.8/384 kHz |
16/24 bit |
| DSD |
.dff, .dsf |
2.8/5.6/11.2 MHz |
N/A |
Additional Notes
- Compatibility may vary. Refer to your model’s Operating Manual for a detailed list of supported formats.
- Use a direct USB connection to the device for optimal performance.
- Ensure that your USB device has no physical damage or formatting issues.
By following these steps, you should be able to enjoy music playback seamlessly on your Technics Network Audio Player. For further assistance, refer to the Operating Manual.
