3 - Way cleaning
Method 1 - Using the
Self-Cleaning.
- Fill the water Tank with tap water.
- Set the Temperature Selector to
the “ O
" position.
- Plug the Power Plug into a household outlet.
- Set the Temperature Selector to
the “ MAX " position.
- Unplug the iron after the Thermostat Operating Indicator
Light has gone out.
- Hold the iron horizontally over the sink, press and hold
the Self-Cleaning Button and gently shake the iron back and
forth. Impurities and scale (if any), together with steam and
boiling water will be flushed out.
Method 2 - Using the Jet of Steam Feature
- Repeat steps 1 to 4 as described in “Method 1”.
- Hold the iron horizontally over the sink after the
Thermostat Operating Indicator Light has gone out.
- Pump the Jet of Steam Button quickly (at least 3 times
per second) about 20-30 times. While pumping, tilt the iron up
and down slowly to help clean the entire inside and let the
water drip out of the soleplate vents.
- Preheat the iron for about 5 minutes at "MAX" temperature
when the iron has cooled without button operation.
- Unplug the Power Plug.
- Do not store the iron with water in the Water Tank.
- Iron on a used cloth to remove any impurities on the
Soleplate.
- Repeat Method 1 and Method 2 if the iron still contains a
lot of impurities.
- Use both methods once every two weeks. If the water in your
area is very hard (i.e. Steam holes on the Soleplate are easily
blocked by impurities), both methods should be used more
frequently.
- Let the iron cool down on its Heel Rest and follow the
instructions “After each use”
Method 3 Anti calc System (Stay
Clean Vents)
The built-in Anti Calc System
in the Water Tank continuously reduces scale build up in the
vaporizing chamber of the iron.
This system makes it possible to use the steam function for a
long period of time and prevents steam vents from
clogging.
How to Care for your iron
after each use.
-
Set the Temperature Selector to
" O ”.
- Turn to iron off and unplug the power plug.
- Empty the iron immediately after using. Do not store
the iron with water in it.
If you empty the iron after it has cooled, heat the iron for
about 5 minutes ar "MAX" temperature.
- Set the Steam/Dry Selector to the Dry position. If the
Steam/Dry Selector is not in the Dry position after using,
remaining water will move into the Soleplate and can result in
burns when the iron is used next time.
- Do not use the Steam or the “Jet of Steam” while the Power
Plug is unplugged or the Temperature Selector is set to
“ O ”,
water will remain inside the Soleplate and cause staining.
- Wait until the iron has cooled before storing it, and
always set it on the Heel Rest to protect the Soleplate from
scratches, corrosion or stains.
Cleaning the outside surface of
the iron
- After unplugging and cooling the iron, simply wipe off with
a damp cloth and if necessary, use a mild detergent.
- Never use any harsh cleaners.
Cleaning the Soleplate
-
Starch and other residue may be easily removed from the
Soleplate with a damp cloth.
-
To avoid scratching the finish, never use a metallic
pad to clean the Soleplate, and never place the iron on a
rough surface.
-
The best way to remove synthetic residue from the
Soleplate is to iron over an old cotton cloth rag after
heating the iron.
Note
-
Never use cleaners in the iron, since they may damage
the working parts of the iron. Some odor may be released
during initial use of the iron, however, this is normal and
the odor will not attach to your clothes. Never use steam
iron detergent in the iron, as they may damage working parts
of the iron.
