When other equipment responds to the supplied
remote control, change the remote control mode.
Model SU-G30
The factory default is “Mode 1
Press [SETUP].
Press the arrow up ▲ or down ▼ button to select
“Remote Control” and
then press [OK].
The current remote control code of this unit is
displayed.
When “Set Mode 1/2”
is displayed, set the remote control code of the remote
control.
To set "Mode 1”:
Press and hold [OK]
and [1] for at least
4 seconds.
To set “Mode 2”:
Press and hold [OK]
and [2] for at least
4 seconds.
Point the remote control at this unit, and press and hold
[OK] for at least 4
seconds.
When the remote control code is changed, the new code
will appear on the display for a few seconds.
Model SU-GX70
The factory default is “Mode 1”.
Press [SETUP].
Press [▲], [▼] to select “Remote
Control” and then press [OK].
The current remote control mode of this unit is
displayed.
When “Set Mode 1/2” is displayed,
change the remote control mode of the
remote control.
To set “Mode 1”:
Press and hold [OK] and [1] for at least
4 seconds.
To set “Mode 2”:
Press and hold [OK] and [2] for at least
4 seconds.
Point the remote control at this unit,
and press and hold [OK] for at least
4 seconds.
When the remote control mode is changed, the
new mode will appear on the display for a few
seconds.
When “Remote 1” or “Remote 2” is displayed
When “Remote 1” or “Remote 2” is displayed,
the remote control modes of this unit and remote
control are different. Perform step 3 above.
