How to replace the foils and/or blades on shaving and grooming products

Model ER-GB42

Removing the blade

Hold the main body, place your thumb against the blades, and then push them away from the main body.

Remounting the blade

Fit the mounting hook into the blade mounting on the trimmer, and then push in until you hear a click.

Model ER-GB60, ER-GB80

Mounting the Blade

Fit the mounting hook into the blade mounting on the trimmer and then push in until you hear a click.

Models ER-GB96

Removing the Blade

Hold the clipper with the switch facing upward and push the blade with your thumb while catching the blade in your other hand.

Mounting the blade

Fit the mounting hook (B) into the blade mounting (A) as shown in the image below, on the clipper and then push in until you hear a click.

Replacement part

Replacement blade WER9620 for ER-GB96. Do not use any blade other than the one dedicated as it may cause defect in performance.

Models ER-GC51, ER-GC71

Removing the Blade

Hold the clipper with the switch facing upward and push the blade with your thumb while catching the blade in your other hand.

Mounting the blade

Fit the mounting hook (B) into the blade mounting (A) as shown in the image below, on the clipper and then push in until you hear a click.

Model ER-GD50

Removing the blade

Hold the trimmer and push the blade with your thumb.

Mounting the blade

Fit the mounting hook (B) into the blade mounting (A) on the trimmer and then push in until you hear a click.

Caution Protecting the skin

• Do not press the blade against your lip or the skin.
• Do not use this product for any purpose other than trimming beard.
• Do not directly apply the blades on ears or rough skin (such as swellings, injuries or blemishes). Doing so may cause skin injury

Model ER-GK40

Replacing the outer foil

Never remove the outer foil at any time other than when replacing it.

1. Press the foil frame release buttons to remove the foil frame.
2. Squeeze the front and the back side of the foil frame and lift up one of the two knobs on the outer foil.
3. Slip the outer foil into the frame and guide the plastic edges onto the hooks in the foil frame until it clicks into the shaver.
   

Replacing the inner blade

1. Press the foil frame release buttons to remove the foil frame.
2. Remove the inner blade by grasping it firmly at both ends and pulling straight away from the shaver
3. To insert the new inner blade, hold the blade at both ends and press downward until it snaps into the shaver.
   

Model ER-GK60S

Removing the blade.

Hold the trimmer and push the blade with your thumb.

Mounting the blade.

Fit the mounting hook ( B ) into the blade mounting ( A ) as shown in the image below on the trimmer and then push in until you hear a click.

Model ER-GK80S

Removing the blade.

Please check if the blade is deformed or damaged before removing and mounting it.

1. Hold the main body in front.
2. Push the metal part of the blade to the left with the thumb’s belly.
   
   • It is OK to touch the blade with your fingers, but use caution when doing.
   • Be careful not to let the blade fall.

Mounting the blade.

Fit the mounting hook ( B ) into the blade mounting ( A ) on the main body as shown in the image below and then push in until you hear a click.

Replacement Parts

• Blade WER9500

Do not use any blade other than the one dedicated as it may cause problems with performance.

Removing and mounting the blade for Maintenance purpose Model ER-GM40

• Press the head with your fingers to avoid excessive vibration.
• Make sure that the main body is turned off.
  

Removing the blade

1. Slide the blade locker towards the body of the unit as indicated by the arrow in the image below. It is easier to slide it with your nail.
   
2. Remove it in an upward direction as indicated in the image below. There is a protusion (marked as D in image below) that assists in the removal. Be careful not to drop the blade.
   

Mounting the blade

1. Insert the tiny hook located at the top of the main body onto the hole on the top of the blade.
   
2. Slider the blade lock towards the blade.
   

Model ER-GN70

Make sure that the power is off.

How to remove the blade

1. Rotate the outer blade and remove it. Rotate the outer blade until its hash mark aligns with the “I” mark of the main body.
2. Pull to remove the inner blade.

How to attach the blade

1. Insert the inner blade straight along the inner surface of the outer blade.
2. Insert the main body’s shaft (c) as shown in the image below into the hole of the inner blade.
   • Align the hash mark of the outer blade with the “ I ” mark of the trimmer.
     
     
     
3. Rotate to attach the outer blade.
4. Rotate the outer blade to align its hash  mark with the arrow ▲ up mark of the main body.

Models ER-GP21

Removing the Blade

Hold the clipper with the switch facing upward and push the blade with your thumb while catching the blade in your other hand.

Mounting the blade

Fit the mounting hook (B) into the blade mounting (A) as shown in the image below, on the clipper and then push in until you hear a click.

Models ER-GP30

Removing the Blade

Hold the clipper with the switch facing upward and push the blade with your thumb while catching the blade in your other hand.

Mounting the blade

Fit the mounting hook (B) into the blade mounting (A) as shown in the image below, on the clipper and then push in until you hear a click.

Model ER-GP80

Be sure to turn off the power before you remove the blade.

Removing the blade

Hold the clipper with the switch facing upward and push the blade with your thumb while catching the blade in your other hand.

Mounting the blade

1. Set the dial to "2.0".
   
   
2. Fit the mounting hook into the blade mounting on the clipper and push in until it clicks.
   

Model ER-SB40

Please use the following procedure to remove and mount the blade.

Removing the blade

Hold the main body with the switch facing upward and push the blade with your thumb while catching the blade in your other hand.

Mounting the blade

Fit the mounting hook (B) into the blade mounting (A) on the main body as shown in the image below and then push in until you hear a click.

Model ER-SC40

Please use the following procedure to remove and mount the blade.

Removing the blade

Hold the main body with the switch facing upward and push the blade with your thumb while catching the blade in your other hand.

Mounting the blade

Fit the mounting hook (B) into the blade mounting (A) on the main body as shown in the image below and then push in until you hear a click.

Model ES-8103

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated.
2. Press the system outer foil release buttons and pull down the system outer foil as illustrated.
3. Insert the system outer foil until it clicks.
   • Always attach the system outer foil in proper direction.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated.
2. Remove the inner blades one at a time as illustrated. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click as illustrated.

Model ES-8243

The Check Foil Blade indicator appears on the LCD panel once a year. (This will differ depending on usage.) We recommend checking the system outer foil and in the inner blades when it appears. Press the OFF/ON switch for more than 30 seconds to remove the indicator.

1. Press the system outer foil release buttons and lift the system outer foil upwards as illustrated.
2. Remove the inner blades one at a time as illustrated. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click as illustrated.
   
   
   
   
4. Insert the system outer foil by pushing it downwards until it clicks.

Model ES-3831, ES-3833

Replacing the outer foil

1. Press the foil frame release button and lift the foil frame upwards as illustrated.
2. Gently push the outer foil in the way as illustrated. Then it will pop up from the foil frame.
3. The new outer foil should be slightly bent and pushed in until it is hooked in the foil frame.

Replacing the inner blade

1. Remove the inner blade. Do not touch the edges (metal parts) of the inner blade to prevent injury to your hand.
2. Insert the inner blade until it clicks.

Note:

• Turn the shaver off before replacing the outer foil and the inner blade.

Model ES-ALV6HR

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.
   
   
2. Align the foil frame mark () and the system outer foil mark () and securely attach together until it clicks

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
   

Model ES-CM3A-K, ES-CM3A-V, ES-CM3A-W

• It is recommended to replace the system outer foil once a year and the inner blades once every two years.

Replacement parts

• Replacement parts are available at your dealer or Service Center.
  Replacement parts for ES-CM3A - System outer foil WES9087
  Inner blades - WES9068.

Outer foil section

1. Press the foil frame release buttons to lift and remove the outer foil section.

1. Turn the foil frame mark ( ) to the front, and securely attach the outer foil section onto the main body until a “click” sound is heard.

System outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.

1. Align the foil frame mark () with the system outer foil mark (), and securely attach them together until a “click” sound is heard.
   • Do not press the system outer foil release buttons with excessive force.
     
2. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.
   • The system outer foil cannot be reversely installed.
   • When installing the system outer foil into the main body, ensure that the system outer foil is inserted into the foil frame.

1. Remove one inner blade at a time.
   • Do not touch the edges (metallic section) of the inner blades in case your hands are injured.

1. Insert one inner blade at a time until they are fixed in position.
   

Note

• Do not throw away the foil frame.

Model ES-GA21

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated.
2. Press the system outer foil release buttons and pull down the system outer foil as illustrated.
3. Insert the system outer foil until it clicks.
   • Always attach the system outer foil in proper direction.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated.
2. Remove the inner blades one at a time as illustrated. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click as illustrated.

Model ES-LA63A

The Check Blade Foil indicator appears on the lamp display once a year. (This will differ depending on usage.)

We recommend checking the system outer foil and the inner blades when it appears.

Press the ON / OFF switch for more than 30 seconds to turn off the indicator.

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
   
2. Press the system outer foil release buttons and pull down the system outer foil.
3. Align the foil frame mark and the system outer foil up ▲ mark and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
     
4. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
2. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click.
   

Replacement parts

Model ES-LA93

The Check Blade Foil indicator appears on the lamp display once a year. (This will differ depending on usage.)

We recommend checking the system outer foil and the inner blades when it appears.

Press the ON / OFF switch for more than 30 seconds to turn off the indicator.

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
   
2. Press the system outer foil release buttons and pull down the system outer foil.
3. Align the foil frame mark and the system outer foil up ▲ mark and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
     
4. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
2. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click.
   

Model ES-LF51

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
   
2. Press the system outer foil release buttons and pull down the system outer foil.
3. Align the foil frame mark and the system outer foil up ▲ mark and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
     
4. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
2. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click.
   

Replacement parts

Models ES-LS8A, ES-LS9A

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Align the foil frame mark and the system outer foil up mark ▲ and securely attach together until it clicks.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

Note

Do not throw away the foil frame.

Models ES-LT2B

Models ES-LT3N

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Align the foil frame mark  and the system outer foil up mark ▲ and securely attach together until it clicks.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.

Replacement parts

Model ES-LT41

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
   
2. Press the system outer foil release buttons and pull down the system outer foil.
3. Align the foil frame mark and the system outer foil up ▲ mark and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
     
4. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
2. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click.
   

Replacement parts

Models ES-LT5N

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Align the foil frame mark  and the system outer foil up mark ▲ and securely attach together until it clicks.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.

Replacement parts

Models ES-LT67

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Align the foil frame mark  and the system outer foil up mark ▲ and securely attach together until it clicks.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.

Replacement parts

Model ES-LT7N

The Check Blade Foil indicator appears on the lamp display once a year. (This will differ depending on usage.)

We recommend checking the system outer foil and the inner blades when it appears.

Press the power switch for more than 30 seconds to turn off the indicator.

Even if the indicator is not turned off right after the replacement, it will automatically turn off within approximately 7 uses.

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Align the foil frame mark and the system outer foil up mark ▲ and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

Replacing the inner blades

1. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.

Note:

• Do not throw away the foil frame.

Replacement parts

Model ES-LT71

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
   
2. Press the system outer foil release buttons and pull down the system outer foil.
3. Align the foil frame mark and the system outer foil up ▲ mark and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
     
4. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
2. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click.
   

Model ES-LV6N

The Check Blade Foil indicator appears on the lamp display once a year. (This will differ depending on usage.)

We recommend checking the system outer foil and the inner blades when it appears.

Press the power switch for more than 30 seconds to turn off the indicator.

Even if the indicator is not turned off right after the replacement, it will automatically turn off within approximately 7 uses.

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Align the foil frame mark and the system outer foil up mark ▲ and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

Replacing the inner blades

1. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.

Note:

• Do not throw away the foil frame.

Replacement parts

Model ES-LV6Q

Check foil blade indicator appears on the lamp display once a year. (Based on one 3-minute shave use per day) We recommend checking the system outer foil and the inner blades when it appears. Press the power switch for more than 30 seconds to turn off the indicator. If the indicator is not turned off right after the replacement, it will automatically turn off within approximately 7 uses.

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil. Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.
2. Align the foil frame mark  and the system outer foil up mark ▲ and securely attach together until it clicks.

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.

Note:

Do not throw away the foil frame.

Replacement parts

Model ES-LV61

When the check blade, foil indicator appears on the LCD panel once a year. (This will differ depending on usage). We recommend checking the system outer foil and the inner blades when it appears. Press the Power switch for more than 30 seconds to turn off the indicator.

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards.
2. Press the system outer foil release buttons and pull down the system outer foil.
3. Align the foil frame mark and the system outer foil up mark ▲ and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
     
     
4. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards.
2. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click.
   
   

Replacement parts

Model ES-LV65

The Check Blade Foil indicator appears on the lamp display once a year. (This will differ depending on usage.)

We recommend checking the system outer foil and the inner blades when it appears.

Press the power switch for more than 30 seconds to turn off the indicator.

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Align the foil frame mark and the system outer foil up mark ▲ and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

Replacing the inner blades

1. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.

Note:

• Do not throw away the foil frame.

Replacement parts

Model ES-LV67

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil. Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.
2. Align the foil frame mark  and the system outer foil up mark ▲ and securely attach together until it clicks.

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.

Note:

Do not throw away the foil frame.

Replacement parts

Model ES-LV81

When the check blade, foil indicator appears on the LCD panel once a year. (This will differ depending on usage). We recommend checking the system outer foil and the inner blades when it appears. Press the Power switch for more than 30 seconds to turn off the indicator.

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards.
2. Press the system outer foil release buttons and pull down the system outer foil.
3. Align the foil frame mark and the system outer foil up mark ▲ and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
     
     
4. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards.
2. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click.
   
   

Replacement parts

Model ES-LV9N

The Check Blade Foil indicator appears on the lamp display once a year. (This will differ depending on usage.)

We recommend checking the system outer foil and the inner blades when it appears.

Press the power switch for more than 30 seconds to turn off the indicator.

Even if the indicator is not turned off right after the replacement, it will automatically turn off within approximately 7 uses.

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Align the foil frame mark and the system outer foil up mark ▲ and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

Replacing the inner blades

1. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.

Note:

• Do not throw away the foil frame.

Replacement parts

Model ES-LV9Q

Check foil blade indicator appears on the lamp display once a year. (Based on one 3-minute shave use per day) We recommend checking the system outer foil and the inner blades when it appears. Press the power switch for more than 30 seconds to turn off the indicator. If the indicator is not turned off right after the replacement, it will automatically turn off within approximately 7 uses.

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil. Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.
2. Align the foil frame mark  and the system outer foil up mark ▲ and securely attach together until it clicks.

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.

Note:

Do not throw away the foil frame.

Replacement parts

Model ES-LV95

The Check Blade Foil indicator appears on the lamp display once a year. (This will differ depending on usage.)

We recommend checking the system outer foil and the inner blades when it appears.

Press the power switch for more than 30 seconds to turn off the indicator.

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Align the foil frame mark and the system outer foil up mark ▲ and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

Replacing the inner blades

1. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.

Note:

• Do not throw away the foil frame.

Replacement parts

Model ES-LV97

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil. Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.
2. Align the foil frame mark  and the system outer foil up mark ▲ and securely attach together until it clicks.

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.

Note:

Do not throw away the foil frame.

Replacement parts

Model ES-RF31

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated.
2. Press the system outer foil release buttons and pull down the system outer foil as illustrated.
3. Insert the system outer foil until it clicks.
   • Always attach the system outer foil in proper direction.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated.
2. Remove the inner blades one at a time as illustrated. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click as illustrated.

Model ES-RM3B-K, ES-RM3B-A

• It is recommended to replace the system outer foil once a year and the inner blades once every two years.Replacing the system outer foil and the inner blades.
• It is recommended to replace the system outer foil once a year and the inner blades once every two years.

Replacement parts are available at your dealer or Service Center.

Outer foil section

How to remove

• Press the foil frame release button, and lift to remove the outer foil section.

How to install

1. Insert the right side first, and then insert the right side first, and then insert the left side until it is in place.

System Outer foil section

1. Press the system outer foil release buttons, and pull down the system outer foil.
   

How to install

1. Align them correctly, and securely attach them together until a "click" sound is heard.
2. The system outer foil cannot be reversely installed.
3. To install it back to the shaver, make sure that the system outer foil is inserted into the foil frame.

1. Remove one inner blade at a time.
   • Do not touch the edges (metallic section) of the inner blades in case your hands are injured.
     

1. Insert one inner blade at a time until they are fixed in position.

Note

• Do not press the system outer foil release buttons with excessive force.
  Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

Model ES-RT17

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. Securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Insert the system outer foil until it clicks.
   • Always attach the system outer foil in proper direction.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.

Replacing the inner blades

1. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.

Replacement parts

Model ES-RT31

Replacing the outer foil section

1. Press the system outer foil release buttons and lift the system outer foil upwards as illustrated.
   
   
2. Insert the system outer foil by pushing it downwards until it clicks.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated.
   
   
2. Remove the inner blades one at a time as illustrated. Do not touch the edges (metal parts) of the innerblades to prevent injury toyour hand.
   
   
3. Insert the inner blades one at a time until they click as illustrated.

Model ES-RT33

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. Securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Insert the system outer foil until it clicks as illustrated.
   • Always attach the system outer foil in proper direction.
   • Always inser the system outer foil to the foil frame when attaching to the shaver.
     
     

Replacing the inner blades

1. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time unti they click.
   

Replacement parts

Model ES-RT47

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. Securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Insert the system outer foil until it clicks.
   • Always attach the system outer foil in proper direction.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.

Replacing the inner blades

1. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.

Replacement parts

Model ES-RT51

Replacing the outer foil section

1. Press the system outer foil release buttons and lift the system outer foil upwards as illustrated.
   
   
2. Insert the system outer foil by pushing it downwards until it clicks.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated.
   
   
2. Remove the inner blades one at a time as illustrated. Do not touch the edges (metal parts) of the innerblades to prevent injury toyour hand.
   
   
3. Insert the inner blades one at a time until they click as illustrated.

Model ES-RT53

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. Securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Insert the system outer foil until it clicks as illustrated.
   • Always attach the system outer foil in proper direction.
   • Always inser the system outer foil to the foil frame when attaching to the shaver.
     
     

Replacing the inner blades

1. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time unti they click.
   

Replacement parts

Models ES-RT67, ES-RT77, ES-RT97

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. Securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Insert the system outer foil until it clicks.
   • Always attach the system outer foil in proper direction.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.

Replacing the inner blades

1. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.

Replacement parts

Model ES-RW30

Replacing the outer foil section

1. Press the system outer foil release buttons and lift the system outer foil upwards as illustrated.
   
   
2. Insert the system outer foil by pushing it downwards until it clicks.

Replacing the inner blades

1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated.
   
   
2. Remove the inner blades one at a time as illustrated. Do not touch the edges (metal parts) of the innerblades to prevent injury toyour hand.
   
   
3. Insert the inner blades one at a time until they click as illustrated.

Model ES-SL21

Check foil blade indicator appears on the lamp display once a year. (Based on one 3-minute shave use per day) We recommend checking the system outer foil and the inner blades when it appears. Press the power switch for more than 30 seconds to turn off the indicator. If the indicator is not turned off right after the replacement, it will automatically turn off within approximately 7 uses.

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil. Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.
2. Align the foil frame mark  and the system outer foil up mark ▲ and securely attach together until it clicks.

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.

Note:

Do not throw away the foil frame.

Replacement parts

Model ES-SL33

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
   
   
2. Align the front side of the foil frame with the system outer foil up mark ▲ and insert them firmly together.

Note:

• The system outer foil cannot be reversely attached.
• Always insert the system outer foil to the foil frame when attaching to the shaver.

Replacing the inner blades

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
   
3. Insert the inner blades one at a time until they click.

Replacement parts

Model ES-SL41

Check foil blade indicator appears on the lamp display once a year. (Based on one 3-minute shave use per day) We recommend checking the system outer foil and the inner blades when it appears. Press the power switch for more than 30 seconds to turn off the indicator. If the indicator is not turned off right after the replacement, it will automatically turn off within approximately 7 uses.

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.

Attaching the outer foil section

1. After turning the foil frame mark to the front, securely attach the outer foil section to the shaver until it clicks.

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil. Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.
2. Align the foil frame mark  and the system outer foil up mark ▲ and securely attach together until it clicks.

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.

Note:

Do not throw away the foil frame.

Replacement parts

Model ES-SL83

Replacing the system outer foil

1. Press the system outer foil release buttons and pull down the system outer foil.
   
   
2. Align the front side of the foil frame with the system outer foil up mark ▲ and insert them firmly together.

Note:

• The system outer foil cannot be reversely attached.
• Always insert the system outer foil to the foil frame when attaching to the shaver.

Replacing the inner blades

1. Press the system outer foil release buttons and pull down the system outer foil.
2. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
   
3. Insert the inner blades one at a time until they click.

Replacement parts

Model ES-ST2N

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards.
   

Attaching the outer foil section

1. After turning the water inlet surface to the front, securely attach the outer foil section to the shaver until it clicks
   

Replacing the system outer foil

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
2. Align the water inlet surface and the system outer foil up mark ▲ and securely attach together.
   • Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time

Replacement parts

Model ES-ST25

Removing the outer foil section

1. Press the foil frame release buttons and lift the outer foil section upwards.
   
   

Attaching the outer foil section

1. After turning the water inlet surface to the front, securely attach the outer foil section to the shaver until it clicks.
   
   

Replacing the system outer foil

1. Press the foil frame release buttons and pull down the system outer foil.
2. Align the water inlet surface and the system outer foil up mark ▲ and securely attach together.
   • The system outer foil cannot be reversely attached.
   • Always insert the system outer foil to the foil frame when attaching to the shaver.
     

Replacing the inner blades

1. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.
   
   

Replacement parts

Models ES-SWLT2W

Models ES-WL60, ES-WL80

Replacing the outer foil

1. Press the outer foil frame release buttons to remove the foil frame.
   
2. Hold the knobs on the outer foil with your finger as illustrated in the image below. Lift it up in the direction of the arrow while pushing the edge of outer foil from the outside.
3. Align the directions of knobs as illustrated below and insert the new outer foil into the frame.
   
4. Insert the plastic edges into the frame until they click.

Replacing the inner blade

1. Hold the inner blade at both ends firmly and pull it straight away from the shaver to remove.
2. Insert the new inner blade by holding it at both ends and press it downward until it clicks.